VoxelSparks PVA Filament 1.75mm 500g

Product Features

    Easily dissolved in water
    Smooth support interface
    Recommended for all PLA
    Comes with High Temperature Reusable Spool
    Diameter: 1.75mm +/- 0.03mm

 
Cautions for Use

    ONLY used for support
    Not to be used for standalone models
    All AMS Series Compatible
    0.2 mm Nozzle NOT Compatible
    Dry Out Before Use

Note: Before printing, please kindly refer to the Printing Tips for optimal results.

Printing Tips

• Drying conditions: 80°C for 12 hours. For optimal printing performance, it must be thoroughly dried before use and after storage. 

• PVA is suitable for use with AMS and AMS lite in a dry state. If the filament becomes soft or sticky due to moisture, it must be dried again before use to prevent issues such as feeding failure, nozzle clogging, and low print quality.

• PVA may darken in color after extended storage or multiple drying cycles, but it won't affect its printing performance or support capabilities.

• Recommend to use normal support instead of tree support. Tree support is more likely to collapse during printing.

• Use warm water to speed up the dissolving process. But if supporting PLA, the maximum water soaking temperature should not exceed 50°C to prevent deformation of the main model.

• Waiting for complete dissolution is not necessary when soaking and dissolving PVA support. You can manually remove the partially dissolved PVA support to reduce the waiting time.

• Depending on the use case, VoxelSparks PVA can also be used solely for printing the support interface to minimize material waste and printing time.